Some things are harder to teach than others.
Uncategorized
53
Posts
31
Posters
0
Views
-
I think this dynamic of people learning a task wanting formal official steps leads to people thinking that there is "One Right Way" to do tasks that can be done in many ways.
A frustrated teacher formalizes something that just isn't formal to avoid having everyone bugging her over and over "but how do I start it? how do I knot it?"
Will I cause someone in 20 years to be told "That's the Wrong Way to do it."
hmmm
@futurebird
OMG! I was discussing this “one right way” or “where is the template?” Linear thinking, simplistic, “100% certainty” approach.
A(ny old) way - tends to be the first solution people come up with in solving a problem. Then they stop looking.
The (most suitable) way - is the optimum way to address a need or problem and requires critical thinking/effort/patience/determination/tenacity/perseverance/grit/adaptability. -
Some things are harder to teach than others. One of the most difficult things to explain is "how to start sewing without putting a knot at the end of the thread."
Like many tasks that I stumble over when teaching I made the fatal mistake of thinking "this is easy"
I think I need to draw diagrams?
What makes it worse is it's not that important when you are sewing a book signature how you "knot the thread" since it will be covered in glue later.
My students want an "Official Procedure"
Does it become "official" when coded in hardware?
I still have the tin, but (k)not the machine, from my dad's automatic knotter.
He was a textile mechanic and this was in common use in the spinning and weaving sheds.
-
@futurebird thank you, it's perfect! I'll try it soon. @va2lam @bucknam
-
OK I've tried to draw it.
Do not overthink the details of these diagrams. Consider the difference between using a knot to hold the thread vs. using friction.
Friction is often a better, more robust solution. There are many ways to start sewing. Just overlap your stitches, back-stitch a few times until you feel it will not slide out.
@futurebird @Anke @va2lam @bucknam
When I was four, I learned both methods, but the second was much easier if I started with the first. The knot helped hold the thread in place for the first few stitches. When you are just learning, it’s very easy to accidentally pull the thread through when you go back, the knot stops that happening.
-
@futurebird @va2lam @bucknam
My grandmother taught me how to weave in ends on the back of the work when doing embroidery, but no-one ever taught me to sew. Wishing I had known to ask now.@Anke @futurebird @va2lam @bucknam nothing stopping you from starting now. sometime last year i started getting into fixing the fabric things around the house and it takes time but isn't very intimidating
-
I thought making a diagram was "overkill" but I can see that it's not.
Lets see if this helps them to be more independent about this part of the project.
It’s not just kids. I’ve seen grown adults, paid a salary to come up with solutions to problems, also asking,
- “keep it simple and tell me the “one right answer”!
- “Give me the answer and don’t make me work for it”.
- “I don’t want to make an(y) effort. Give me the answer”.It is a kind of “cognitive abdication”, “don’t make me think” or learned/programmed helplessness.
-
@futurebird @Anke @va2lam @bucknam
When I was four, I learned both methods, but the second was much easier if I started with the first. The knot helped hold the thread in place for the first few stitches. When you are just learning, it’s very easy to accidentally pull the thread through when you go back, the knot stops that happening.
@david_chisnall @Anke @va2lam @bucknam
This makes sense, though if that knot is taking a lot of tension because the person learning to sew is pulling too hard it's going to cause further problems. Learning to manage the tension is a big part of sewing. So the thread is taught... but not pulling on the fabric or paper much.
It's one of the reasons I like sewing books with them. Too much tension will tear the paper. Instant feedback.
-
It’s not just kids. I’ve seen grown adults, paid a salary to come up with solutions to problems, also asking,
- “keep it simple and tell me the “one right answer”!
- “Give me the answer and don’t make me work for it”.
- “I don’t want to make an(y) effort. Give me the answer”.It is a kind of “cognitive abdication”, “don’t make me think” or learned/programmed helplessness.
I will help someone who is overwhelmed if we are just trying to get a task done. But when I'm teaching?
Well I'm not teaching anything if students don't confront this.
-
OK I've tried to draw it.
Do not overthink the details of these diagrams. Consider the difference between using a knot to hold the thread vs. using friction.
Friction is often a better, more robust solution. There are many ways to start sewing. Just overlap your stitches, back-stitch a few times until you feel it will not slide out.
@futurebird @Anke @va2lam @bucknam
So lovely.
Sewing is an alien art for me, I envy you. I won't start now, but I see this as a wonderful Taoist case study!
Let the material decide how it wants to be treated. The knot is my external will, clumsily imposed on the thread; the friction loop is the inner nature of the thread, gracefully doing what it does, skillfully aligned with my needs.
I love the drawing too!
-
@david_chisnall @Anke @va2lam @bucknam
This makes sense, though if that knot is taking a lot of tension because the person learning to sew is pulling too hard it's going to cause further problems. Learning to manage the tension is a big part of sewing. So the thread is taught... but not pulling on the fabric or paper much.
It's one of the reasons I like sewing books with them. Too much tension will tear the paper. Instant feedback.
My grannie taught me sewing, knitting and embroidery.
Yet here I am, learning more, 63 years later.
-
@futurebird @va2lam @bucknam
My grandmother taught me how to weave in ends on the back of the work when doing embroidery, but no-one ever taught me to sew. Wishing I had known to ask now.@Anke @futurebird @va2lam @bucknam
I started with embroidery when I was very young, too. Would sew everything in backstitch. Very secure.Actually, I still backstitch most of the time.
-
I will help someone who is overwhelmed if we are just trying to get a task done. But when I'm teaching?
Well I'm not teaching anything if students don't confront this.
@futurebird I agree that independent learning and being prepared to make some effort navigating through trial and error but people behave like making any cognitive effort I.e. learning “by trail and error” is “an affront” to their personage.
-
@futurebird @Anke @va2lam @bucknam
So lovely.
Sewing is an alien art for me, I envy you. I won't start now, but I see this as a wonderful Taoist case study!
Let the material decide how it wants to be treated. The knot is my external will, clumsily imposed on the thread; the friction loop is the inner nature of the thread, gracefully doing what it does, skillfully aligned with my needs.
I love the drawing too!
@the_roamer @Anke @va2lam @bucknam
Sewing is weaving with just one thread at a time and a tiny little shuttle.
-
@Anke @futurebird @va2lam @bucknam
I started with embroidery when I was very young, too. Would sew everything in backstitch. Very secure.Actually, I still backstitch most of the time.
@sollat @anke @futurebird @va2lam @bucknam Every stitch is a "knot"!
-
@sollat @anke @futurebird @va2lam @bucknam Every stitch is a "knot"!
@sbourne @Anke @futurebird @va2lam @bucknam
Maybe half a knot. One shared hole, not two. Waltzing down the seam. -
OK I've tried to draw it.
Do not overthink the details of these diagrams. Consider the difference between using a knot to hold the thread vs. using friction.
Friction is often a better, more robust solution. There are many ways to start sewing. Just overlap your stitches, back-stitch a few times until you feel it will not slide out.
@futurebird @Anke @va2lam @bucknam Bahh this will save me so much time and heartache. I was definitely taught to tie a knot in school and as a little one sewing buttons, but knots are such a pain and never really work!
-
OK I've tried to draw it.
Do not overthink the details of these diagrams. Consider the difference between using a knot to hold the thread vs. using friction.
Friction is often a better, more robust solution. There are many ways to start sewing. Just overlap your stitches, back-stitch a few times until you feel it will not slide out.
@futurebird
This is an amazing illustration -
I think this dynamic of people learning a task wanting formal official steps leads to people thinking that there is "One Right Way" to do tasks that can be done in many ways.
A frustrated teacher formalizes something that just isn't formal to avoid having everyone bugging her over and over "but how do I start it? how do I knot it?"
Will I cause someone in 20 years to be told "That's the Wrong Way to do it."
hmmm
@futurebird @clew It's an attitude that gets more and more prevalent the more formal schooling the kids get.If you haven't read it yet, I think you would enjoy reading "Building Thinking Classrooms" by P Liljedahl. He distinguishes between "doing school" and "learning".
-
@the_roamer @Anke @va2lam @bucknam
Sewing is weaving with just one thread at a time and a tiny little shuttle.
@futurebird @the_roamer @Anke @va2lam @bucknam as a bobbin lace maker I was afraid of the lace to unravel but once I started to understand friction, not to mention I use mostly linen, I have had no need for any knots. Once I learned how to splice, even thin (linen, hemp, jute or other "hard" stuff) yarns, I got totally freed from knots.
-
undefined oblomov@sociale.network shared this topic
Gli ultimi otto messaggi ricevuti dalla Federazione
-
@spencexyz cool! Please let me know how I can help. We have a Geosocial Task Force for ActivityPub work. Maybe you'd like to be involved....?
-
@theleftistlawyer you're a hero!
-
@spencexyz I recommend following the hashtag #BikeTooter for more bike-minded friends
-
@spencexyz Welcome! This is definitely a broadly pro-cycling place so you'll find like-minded folks
-
-
@VeroniqueB99 too much windy, eh?!
-
This post did not contain any content.
-
Per chi utilizza Linux ed ha bisogno di un editor pdf esiste Master Pdf Editor. Software molto professionale, a pagamento. Se usate molto i pdf lo consiglio.
Se ne fate un uso sporadico, la vecchia versione 4 (ora siamo alla 5) è ancora "gratis per uso personale". Chiaramente ha qualcosa in meno rispetto alla 5, ma se appunto non fate cose sofisticate....
Dal sito ufficiale code-industry.net non si trova, ma potete trovare qui i deb dell'ultima versione usabile gratis per usi non commarciali
Il deb sul mio portatilino 13" con mint funziona benissimo.
https://www.linuxuprising.com/2019/04/download-master-pdf-editor-4-for-linux.html
