Mastodon 4.5 is set to launch this week and there's something you should know:
Uncategorized
5
Posts
3
Posters
18
Views
-
Mastodon 4.5 is set to launch this week and there's something you should know:
All you need to quote a toot is to paste the link of said toot. Or, of course, you can use the boost button and select "Quote".
But pasting a link also works, automatically. If the author allows to be quoted, the toot will appear in the compose field. If not, it'll be just a simple, plain link.
In the end, both paths lead to the same destination: to quote a toot. And, if the author allows quotes, this will generate a notification to them.
So it's important to know that this also works with private mentions, aka DMs.
Even if you don't mention the author's profile (user@instance.tld), if you simply paste a link to their post, and they allow quotes, they will be notified.
If they don't allow quotes, it'll be just a simple and plain link, and no notification will be sent to them.
So be careful not to end up mentioning someone in a DM without the intention of doing so.
They'll be able to see the DM content where the link was pasted, as if you'd have mentioned them explicitly. But it was just a quoted toot.
Let's see what they say about this: https://github.com/mastodon/mastodon/discussions/36685
-
System shared this topic on
-
Mastodon 4.5 is set to launch this week and there's something you should know:
All you need to quote a toot is to paste the link of said toot. Or, of course, you can use the boost button and select "Quote".
But pasting a link also works, automatically. If the author allows to be quoted, the toot will appear in the compose field. If not, it'll be just a simple, plain link.
In the end, both paths lead to the same destination: to quote a toot. And, if the author allows quotes, this will generate a notification to them.
So it's important to know that this also works with private mentions, aka DMs.
Even if you don't mention the author's profile (user@instance.tld), if you simply paste a link to their post, and they allow quotes, they will be notified.
If they don't allow quotes, it'll be just a simple and plain link, and no notification will be sent to them.
So be careful not to end up mentioning someone in a DM without the intention of doing so.
They'll be able to see the DM content where the link was pasted, as if you'd have mentioned them explicitly. But it was just a quoted toot.
Let's see what they say about this: https://github.com/mastodon/mastodon/discussions/36685
@cadusilva what the fuck
-
undefined oblomov@sociale.network shared this topic on
-
Mastodon 4.5 is set to launch this week and there's something you should know:
All you need to quote a toot is to paste the link of said toot. Or, of course, you can use the boost button and select "Quote".
But pasting a link also works, automatically. If the author allows to be quoted, the toot will appear in the compose field. If not, it'll be just a simple, plain link.
In the end, both paths lead to the same destination: to quote a toot. And, if the author allows quotes, this will generate a notification to them.
So it's important to know that this also works with private mentions, aka DMs.
Even if you don't mention the author's profile (user@instance.tld), if you simply paste a link to their post, and they allow quotes, they will be notified.
If they don't allow quotes, it'll be just a simple and plain link, and no notification will be sent to them.
So be careful not to end up mentioning someone in a DM without the intention of doing so.
They'll be able to see the DM content where the link was pasted, as if you'd have mentioned them explicitly. But it was just a quoted toot.
Let's see what they say about this: https://github.com/mastodon/mastodon/discussions/36685
One of the devs replied to the discussion I started in the Mastodon repo:
https://github.com/mastodon/mastodon/discussions/36685#discussioncomment-14856034 -
One of the devs replied to the discussion I started in the Mastodon repo:
https://github.com/mastodon/mastodon/discussions/36685#discussioncomment-14856034There are now two pull requests proposing changes to quote toots inside private mentions (DM).
[🟢 MERGED] When composing a DM, pasting a link will not create a quote: https://github.com/mastodon/mastodon/pull/36690 [🟢 MERGED] When composing a DM, it'll not be sent if it quotes a toot from someone not mentioned: https://github.com/mastodon/mastodon/pull/36689The fixes are now merged into Mastodon's source code prior to v4.5 release
-
@cadusilva what the fuck
@Ember @cadusilva to be clear, we're grateful for this being pointed out, and working on ways to improve and avoid this.
Gli ultimi otto messaggi ricevuti dalla Federazione
-
figured out the composition and characters mostly! now i can draw it all once more in a cleaner comp later...
-
Print-in-Place Gripper Does It With a Single Motor
[XYZAiden]’s concept for a flexible robotic gripper might be a few years old, but if anything it’s even more accessible now than when he first prototyped it. It uses only a single motor and requires no complex mechanical assembly, and nowadays 3D printing with flexible filament has only gotten easier and more reliable.
The four-armed gripper you see here prints as a single piece, and is cable-driven with a single metal-geared servo powering the assembly. Each arm has a nylon string threaded through it so when the servo turns, it pulls each string which in turn makes each arm curl inward, closing the grip. Because of the way the gripper is made, releasing only requires relaxing the cables; an arm’s natural state is to fall open.
The main downside is that the servo and cables are working at a mechanical disadvantage, so the grip won’t be particularly strong. But for lightweight, irregular objects, this could be a feature rather than a bug.
The biggest advantage is that it’s extremely low-cost, and simple to both build and use. If one has access to a 3D printer and can make a servo rotate, raiding a junk bin could probably yield everything else.
DIY robotic gripper designs come in all sorts of variations. For example, this “jamming” bean-bag style gripper does an amazing, high-strength job of latching onto irregular objects without squashing them in the process. And here’s one built around grippy measuring tape, capable of surprising dexterity.
-
@aeva final form capitalism
i'm imagining some kind of voltron spaceballs robomaid thing here
-
@alsivx per fortuna da mobile non funziona, sarebbe stato pericolosissimo!
-
@smattymatty @britt here's our process: https://fedihost.co/blog/slug/moving-to-and-from-fedihost
-
I can't believe I was not following @xkcd !
Shame on me! 😛😜🤪😝
-
Sabato 31 gennaio manifestazione nazionale a torino. audio della conferenza stampa
@anarchia
Sabato 31 gennaio la manifestazione nazionale “Askatasuna vuol dire libertà, Torino è partigiana”, organizzata dal centro sociale torinese dopo lo sgombero di dicembre e contro le politiche del governo Meloni. In queste settimane Questura e Procura torinesi cercano di
-
@aeva eh the stage is late but it might not yet be final and there is no telling how long it takes
