Some people on activitypub seemed a bit interested in mobile linux, so I decided to share a bit more of my experience on here.
Uncategorized
3
Posts
2
Posters
17
Views
-
Some people on activitypub seemed a bit interested in mobile linux, so I decided to share a bit more of my experience on here. I will break it up into different posts covering different aspects.
I have been using a PinePhone 1.2b (3GB of RAM, 32GB eMMC storage) as my daily driver for roughly four years now. That may sound impressive, but I only really use a phone so people can reach me, for music on the go, and for a browser in a pinch. I'm not on my phone all that often.
PinePhone: https://pine64.org/devices/pinephone/
Currently, I have Mobian (based on Debian) Trixie installed on the internal eMMC storage and a 512GB microSD card mounted at /home, both utilizing full-disk encryption, for plenty of storage for my use-case. I'm using the Phosh interface, since it is more stable in my experience than plasma mobile currently. I also mostly use GTK software since they tend to integrate better with Phosh. I do not have cellular service on it, I even have the entire cellular modem disabled via the hardware dipswitch on the back currently.
Mobian: https://mobian-project.org/
Phosh: https://phosh.mobi/
#mobian #debian #linux #mobilelinux #pinephone #linuxphone #phosh -
Some people on activitypub seemed a bit interested in mobile linux, so I decided to share a bit more of my experience on here. I will break it up into different posts covering different aspects.
I have been using a PinePhone 1.2b (3GB of RAM, 32GB eMMC storage) as my daily driver for roughly four years now. That may sound impressive, but I only really use a phone so people can reach me, for music on the go, and for a browser in a pinch. I'm not on my phone all that often.
PinePhone: https://pine64.org/devices/pinephone/
Currently, I have Mobian (based on Debian) Trixie installed on the internal eMMC storage and a 512GB microSD card mounted at /home, both utilizing full-disk encryption, for plenty of storage for my use-case. I'm using the Phosh interface, since it is more stable in my experience than plasma mobile currently. I also mostly use GTK software since they tend to integrate better with Phosh. I do not have cellular service on it, I even have the entire cellular modem disabled via the hardware dipswitch on the back currently.
Mobian: https://mobian-project.org/
Phosh: https://phosh.mobi/
#mobian #debian #linux #mobilelinux #pinephone #linuxphone #phoshConnectivity
I'm not using cellular service with it at all currently. Back when I did use T-Mobile with it, it was unreliable. However, that was back at the end of Buster and early months of Bookworm, so that might have changed significantly. I currently just use public wifi on the go.
On the wifi front, it has been solid for only supporting 2.4GHz. There were some issues with WPA3 and moving between connections, but Trixie brought fixes that resolved those.
Bluetooth on it works well. Though, if it's actively using bluetooth for something more intensive (like audio) and wifi, then I recommend keeping it to the SBC codec instead of SBC-XQ. It starts having connectivity issues if both of them are actively being used. -
undefined Elena ``of Valhalla'' shared this topic on
-
Connectivity
I'm not using cellular service with it at all currently. Back when I did use T-Mobile with it, it was unreliable. However, that was back at the end of Buster and early months of Bookworm, so that might have changed significantly. I currently just use public wifi on the go.
On the wifi front, it has been solid for only supporting 2.4GHz. There were some issues with WPA3 and moving between connections, but Trixie brought fixes that resolved those.
Bluetooth on it works well. Though, if it's actively using bluetooth for something more intensive (like audio) and wifi, then I recommend keeping it to the SBC codec instead of SBC-XQ. It starts having connectivity issues if both of them are actively being used.@maskedwitch /me waves the secret pinephone daily driver¹ salute :D
I'm using cellular service rather than wifi more than half of the time, and I feel that these days it's way more reliable than it used to be: lately the main reason why I didn't have data service has been because I had not paid for it (ehm... :D ), or disabled international roaming because I live close to a border and then traveled internationally (double ehm...)
to be fair, I never use it for phone calls, only data, so I don't know whether receiving calls is reliable
(and I suspend a lot, because battery and not wanting notifications anyway)
¹ for values of “daily” where I don't use a phone every day
Gli ultimi otto messaggi ricevuti dalla Federazione
-
@hipsterelectron @fasterandworse I've noticed "ai" generated images being used a lot in advertising these days, and I think most of what they're getting out of it right now is that it is something ordinary people can recognize as being "high tech" and that can give it a cool factor, but only up until the point where it peaks and the shit starts sliding down the hill. The "ai" image generation artifacts will inevitably look dated to ordinary people.
-
@hipsterelectron @fasterandworse now, let's talk about art. I work directly with professional artists, and most of my friends are professional artists, and I went to art school, but I am not a professional artist, I'm more of a "prosumer" artist. I cannot emphasize enough how unappealing "ai" image generators are to me, because not only do they remove the fun part of art, they also make the end result look like dog shit 99% of the time.
-
@hipsterelectron @fasterandworse so, again, trying to just apply cruel libertarian thinking here and not prosocial values or anything, I just don't see how long term "ai" businesses wont get out competed by teams of people who are willing to do the work and willing to learn
-
@hipsterelectron @fasterandworse 2) put together a small group of human collaborators, lay down the foundation for the thing you want to build, get a basic product out the door, and gradually build up your team by hiring more people and training them, and so on. Personally, I'm trying as hard as I can to think about this with only greedy intentions, and option 1 still does not look attractive.
-
@hipsterelectron @fasterandworse so, speaking purely from the perspective of let's rub together two moneys and see if we can make a third money, you could 1) use a tool that tries to makes your code more similar to code in its dragnet training corpus based on prompts, learns nothing, makes a mess of everything, and mostly creates messes for the bored human technician to clean up, or
-
@hipsterelectron @fasterandworse what is really great about human collaborators is you can explain things to them, which they can understand, when they don't understand they ask you for clarifications, and the experience is cumulative over time, so they get better at the thing the more you work together.
-
@hipsterelectron @fasterandworse in contrast, I ran a similar experiment the last two months where I hired a friend to help me with one of my side projects, and it was worth every penny. Working with a skilled human collaborator for two months shot the project ahead way faster it would have gone alone, and it helped him raise funds to keep his small business going for a little longer, which means my friends are happier and healthier.
-
@hipsterelectron @fasterandworse my conclusion was that experiment was that it would be faster for me to simply prioritize my recovery and work slower on my projects here and there without the use of "ai" tools at all than it would have been to use them.
