I've had this 6x6x6 L3D Cube for years.
Uncategorized
18
Posts
1
Posters
0
Views
-
Swapped the #PixelBlaze Pico for a Standard, and added a Sensor Board by @wizard. Got a pattern working that uses the built-in accelerometer to measure and animate based on tilt.
Parts arrived and I'm assembling another 6x6x6 LED cube!
Already found two fairly minor things I need to fix, then I'm going to order another batch. -
Parts arrived and I'm assembling another 6x6x6 LED cube!
Already found two fairly minor things I need to fix, then I'm going to order another batch.Second 6x6x6 LED cube assembled! Took about an hour of assembly, off and on.
-
Second 6x6x6 LED cube assembled! Took about an hour of assembly, off and on.
It's super satisfying plugging them in one at a time while it's all powered up. 😁
-
It's super satisfying plugging them in one at a time while it's all powered up. 😁
I've completed the laser-cut acrylic enclosure, based on L3D's original design. This version includes a place to mount a #PixelBlaze & Sensor board by @wizard inside. The Sensor board has an IMU & mic so it can respond to movement & sound. Here it is responding to Restraint by Tycho, with a brilliant pattern written by @benhencke.
I hope to have parts for more available early next week.
More info: https://www.evilgeniuslabs.org/l3d-cube-6x6x6
Buy / Waitlist: https://lectronz.com/products/led-cube-6x6x6
https://www.youtube.com/watch?v=nhR89k7jO5Q&list=PLUYGVM-2vDxJ5HZ9PaJWCferRZ7PWBjdk -
I've completed the laser-cut acrylic enclosure, based on L3D's original design. This version includes a place to mount a #PixelBlaze & Sensor board by @wizard inside. The Sensor board has an IMU & mic so it can respond to movement & sound. Here it is responding to Restraint by Tycho, with a brilliant pattern written by @benhencke.
I hope to have parts for more available early next week.
More info: https://www.evilgeniuslabs.org/l3d-cube-6x6x6
Buy / Waitlist: https://lectronz.com/products/led-cube-6x6x6
https://www.youtube.com/watch?v=nhR89k7jO5Q&list=PLUYGVM-2vDxJ5HZ9PaJWCferRZ7PWBjdkPlanting an LED garden.
I have a few 6x6x6 LED cubes in stock.
Powered by #PixelBlaze by @wizard -
Planting an LED garden.
I have a few 6x6x6 LED cubes in stock.
Powered by #PixelBlaze by @wizardI can't stop playing with these 6x6x6 LED Cubes! (this is also how I test the PCBs & LEDs) 😁
Powered by #PixelBlaze by @wizard -
I can't stop playing with these 6x6x6 LED Cubes! (this is also how I test the PCBs & LEDs) 😁
Powered by #PixelBlaze by @wizardPreparing for and eagerly awaiting the imminent arrival of fresh new prototype PCBs. 😁
-
Preparing for and eagerly awaiting the imminent arrival of fresh new prototype PCBs. 😁
The solder party can finally begin!
-
The solder party can finally begin!
Prototype 8x8x8 LED cube assembly complete!
Now I just need the acrylic case, but the parts are too big for my little laser cutter. HammerSpace (local maker space) to the rescue! -
Prototype 8x8x8 LED cube assembly complete!
Now I just need the acrylic case, but the parts are too big for my little laser cutter. HammerSpace (local maker space) to the rescue!Playing with the 8x8x8 LED Cube, creating new patterns using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8 -
Playing with the 8x8x8 LED Cube, creating new patterns using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8Another new pattern for the 8x8x8 LED Cube, creating using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8
Get the pattern: https://gist.github.com/jasoncoon/545f11fc4431f5e3b772fbee8f702935 -
Another new pattern for the 8x8x8 LED Cube, creating using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8
Get the pattern: https://gist.github.com/jasoncoon/545f11fc4431f5e3b772fbee8f702935Rotating sphere pattern for the 8x8x8 LED Cube, creating using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8
Pattern code: https://gist.github.com/jasoncoon/d1a0e3f4015f73e602b32a79681039aa -
Rotating sphere pattern for the 8x8x8 LED Cube, creating using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8
Pattern code: https://gist.github.com/jasoncoon/d1a0e3f4015f73e602b32a79681039aaCurious what it takes to write 3D patterns for #Pixelblaze by @wizard?
I've written up a short series of tutorials: https://www.evilgeniuslabs.org/tutorials/pixelblaze3d/part1
Among other examples, I show how to display rainbow-colored 3D Perlin noise on a three dimensional #RGB #LED cube.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8 -
Curious what it takes to write 3D patterns for #Pixelblaze by @wizard?
I've written up a short series of tutorials: https://www.evilgeniuslabs.org/tutorials/pixelblaze3d/part1
Among other examples, I show how to display rainbow-colored 3D Perlin noise on a three dimensional #RGB #LED cube.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8It's alive, it's trapped inside, it's luminous, and it likes music.
Audio-reactive pattern and #Pixelblaze by @wizard driving an 8x8x8 volumetric RGB LED cube with frosted acrylic enclosure.
Get your own: https://lectronz.com/products/led-cube-8x8x8 -
Gli ultimi otto messaggi ricevuti dalla Federazione
-
@FraEmme @Raffy_Baffy risposta breve: sì
-
Due
s'incontrano per caso
si guardano, dove? Chissà
negli occhi si incontrano
camminano dandosi la mano
Vanno e dove vanno non lo sanno
Poi si lasciano
ogni tanto guardano là, indietro
dove c'era qualcuno
-
Update: got YunoHost flashed on my microSD card but I just realized that I cannot connect my Raspi via Ethernet (the recommended way) because my router is up on a tall shelf in a closet. So I've ordered a WiFi extender with an Ethernet port.
I hope this will work...
So my Raspi5 with #YunoHost experimentations will have to wait till Thursday morning 😭
-
Il 31 ottobre, in una mossa che rivela la gravità della situazione, l’Ucraina ha lanciato un’operazione ad alto rischio. Un elicottero Black Hawk Uh-60 ha sbarcato un gruppo di 15-20 operatori delle forze speciali Hur (Intelligence Militare) nei sobborghi nord-occidentali di Pokrovsk, nella zona industriale già contestata dalle truppe d’assalto russe.
Formiche
-
“Le cose si stanno sviluppando secondo lo scenario peggiore”, ha ammesso un ufficiale della difesa a Ukrainska Pravda, “Pokrovsk sta collassando troppo velocemente; non ce lo aspettavamo. Se #Pokrovsk cade, non ci sarà via d’uscita per le unità di #Myrnohrad.”
Formiche
-
Cristina Correani (@moonlightshad1.bsky.social)
https://bsky.app/profile/moonlightshad1.bsky.social/post/3m4semsinyc2d
> Eh ma la propaganda sconcia della Zakharova, che brutta roba, come se non fosse vero che ogni euro delle tasse che prende altre destinazioni, tipo il progetto fallimentare dei lager in Albania ma anche il progetto folle del riarmo per miliardi, non venga tolto dalle necessità primarie dei cittadini
-
@informatom @eclecticpassions thanks. I'm just getting started with Raspis, so I appreciate any feedback about backups...
On my Mac I use CarbonCopyCloner but not sure about Raspis...
-
@strght I remember Mailspring to be aesthetically pleasing (https://www.getmailspring.com/), and otherwise Thunderbird is always a trusty option.
