Skip to content

Piero Bosio Social Web Site Personale Logo Fediverso

Social Forum federato con il resto del mondo. Non contano le istanze, contano le persone

Crouching Typewriter, Hidden PC

Uncategorized
1 1 2
  • Crouching Typewriter, Hidden PC

    Go back a couple of generations, and rather than a laptop or a luggable, the office accessory of choice was a portable typewriter. As the 20th century wore on, the typewriter became electric before eventually being eclipsed by luggable and laptop computers. On YouTube, [Prototype] is turning back the clock, by turning an old Smith-Corona electric typewriter into a luggable computer– with a stretch goal of still being able to type.

    Yeah, just gutting the typewriter and shoving an SBC inside wasn’t ambitious enough for [Prototype]: his goal is a working typewriter and an x86 gaming PC. To facilitate this, he guts the Smith-Corona keyboard, and 3D-prints a new top plate to add a little more vertical space in the old typewriter. The new top does recreate the original layout and the Corona switches get printed adapters to fit them to mechanical switches [Prototype] is using with a vibe-coded Arduino. Why one would bother with ChatGPT when QMK is right there, we could not say, but feel free to skip 6:20 to 15:00 if you’re watching the video but want to avoid that side quest.

    Unfortunately, the “get the keyboard working” side-quest is either faked or deferred to video part II, which has not been posted yet. In this video he demonstrates that he can actuate a single hammer with a servo, but that’s a far cry from a working typewriter so, we’re really hoping he comes through on that promise in Part Two. Even if the build stops with just one hammer, that would give the tactile sound-and-feel that other builds turn to solenoids for. Squeezing a small-form-factor motherboard and graphics card into the old Smith-Corona is also going to be an interesting challenge. It’s certainly going to be a step up from using the keyboard as a terminal.

    If you like this project but balk at the idea of destroying a working piece of vintage office equipment, it is possible to turn a typewriter into a USB keyboard non-invasively.

    If you like this project at all, join us in thanking [Katie] for the tip. Not your cup of tea? Tell us what is, with a tip of your own.

    youtube.com/embed/Bgk944awGcQ?…


    hackaday.com/2026/01/30/crouch…


Gli ultimi otto messaggi ricevuti dalla Federazione
Post suggeriti
  • 0 Votes
    1 Posts
    0 Views
    Fra i giovani emerge un elemento rilevante per la democrazia: l’elevato livello di impegno civico. Quasi un giovane su due (47%) in Italia ha già partecipato ad azioni collettive, con una crescita molto marcata rispetto al 2023. La partecipazione a proteste di piazza è passata dal 26% al 43%, mentre restano molto diffuse anche altre forme di azione, come il voto (77%), la firma di petizioni (64%) e le iniziative civiche (36%).Fonte: CILD#giovani #impegnocivico #democrazia #partecipazione
  • 0 Votes
    1 Posts
    1 Views
    Aiutaci a rendere l'Italia un Paese più laico e civile!Iscriviti o rinnova l'iscrizione per il 2026.Più saremo, più avremo forza e capacità di incidere! 👇https://www.uaar.it/adesione
  • 0 Votes
    1 Posts
    0 Views
    I've got a weird issue on my #FreeBSD ThinkPad. Since setting up lagg yesterday which worked fine. I powered off last night and then switched it on this morning. I noticed that I had no network access on either the re1 interface or wlan0. I powered off and on and it worked. I have since discovered that if it doesn't work if I just doas service netif restart it starts to work again.This is my lagg setup in /etc/rc.conf# WiFiwlans_iwlwifi0="wlan0"ifconfig_wlan0="WPA SYNCDHCP"cloned_interfaces="lagg0"ifconfig_lagg0="up laggproto failover laggport re1 laggport wlan0 DHCP"This is the output of ifconfig when it's working:re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether 8c:8c:aa:bd:bb:f0 media: Ethernet autoselect (none) status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE> ether 8c:8c:aa:bd:bb:ef inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=0 ether 8c:8c:aa:bd:bb:ef hwaddr 70:9c:d1:af:ad:93 inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 groups: wlan ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3 regdomain FCC country US authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht vht40 vht80 vht160 -vht80p80 wme roaming MANUAL parent interface: iwlwifi0 media: IEEE 802.11 Wireless Ethernet VHT mode 11ac status: associated nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=0 ether 8c:8c:aa:bd:bb:ef hwaddr 00:00:00:00:00:00 inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 laggproto failover lagghash l2,l3,l4 laggport: re1 flags=5<MASTER,ACTIVE> laggport: wlan0 flags=0<> groups: lagg media: Ethernet autoselect status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>This is the output when not working on first boot:re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether 8c:8c:aa:bd:bb:f0 media: Ethernet autoselect (none) status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE> ether 8c:8c:aa:bd:bb:ef inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>wlan0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=0 ether 8c:8c:aa:bd:bb:ef hwaddr 70:9c:d1:af:ad:93 inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 groups: wlan ssid Smithies channel 40 (5200 MHz 11a vht/80-) bssid f0:9f:c2:ab:8d:c3 regdomain FCC country US authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 17 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k ampdudensity 8 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht vht40 vht80 vht160 -vht80p80 wme roaming MANUAL parent interface: iwlwifi0 media: IEEE 802.11 Wireless Ethernet VHT mode 11ac status: associated nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>lagg0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=0 ether 8c:8c:aa:bd:bb:ef hwaddr 00:00:00:00:00:00 inet 192.168.0.194 netmask 0xffffff00 broadcast 192.168.0.255 laggproto failover lagghash l2,l3,l4 laggport: re1 flags=5<MASTER,ACTIVE> laggport: wlan0 flags=0<> groups: lagg media: Ethernet autoselect status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>I should note that running doas service netif restart once it's working makes it fail again.Any ideas ??
  • 0 Votes
    2 Posts
    0 Views
    @wisegreyowlCats are not from this world 😍